|Waterguard+ Sensor (mounted in brackett)||
A Waterguard+ Sensor (mounted in bracket connected to power and Sensor Tape) is installed in every floor in a shaft.
Wireless connection (WiMEA protocol) to Linkbox+ and sensors.
The sensor bracket is mounted to the wall or to the floor.
|Linkbox+ (central unit)||
Linkbox+ is mounted in a bracket on the wall, connected to external power supply, sensor tape and valve actuator.
Linkbox+ is connected to the internet via local WiFi, network cable and/or LTE (4G).
When connecting to Abra borettslag portal with an activated subscription, all central units (Linkbox+) will interact on a wireless mesh network so that water alarms is sent to surrounding residents around the unit with the water leakage, and to the board/caretaker as well, via portal, SMS and app.
|Waterguard+ Valve (motorized Valve)||
Up to three (3) valves (1"DN25 to 2"DN50) is mounted on cold/hot/circulation water intake after the main stopcock.
Valves is connected the power supply for valves from Linkbox+ with CAT6 network cable and power cable.