Product information - Sensor wires (4, 10 or 100 meters)

ART.no. 5648228 (4 m)
ART. no. 5648229 (10 m)
ART. no. 5648224 (100 m)

The sensor wire must be placed in a good spot for surveillance of leakage, while normal use of the water installations does not affect the system. Placing it under the doorstep in special wet areas and under theplinth of the kitchen bench is recommended.

The sensor wire is placed with isolated areas facing down and is always placed on the lowest possible areas. Must be fastened properly.

If the sensor wires are ordered in lengths over 10 m, the insulation on the wire where the monitoring is placed, must be removed by the plumber. Removing insulation is done by cutting the plastic down to the cobber wire on one side of the wire. This can easily be done using a wallpaper knife.